Pre Rec

“Pre Rec Time” can be used to specify the number of seconds for video and audio to be recorded before the actual recording starts.

Using Pre Rec enables recording of a complete event without missing the initial scenes even when you start the recording late.

Tap “MENU”.

Select “System” with or , followed by tapping “SET”.

Select “Record Set” with or , followed by tapping “SET”.

Select “Rec Mode” with or , followed by tapping “SET”.

Select “Pre Rec” with or , followed by tapping “SET”.

Tap batsu to exit the menu.

Tap RETURN to return to the previous screen.

Select “Pre Rec Time” with or , followed by tapping “SET”.

Select a setting value with or , followed by tapping “SET”.

Tap to exit the menu.

Memo

This is fixed at “5 sec” when “System” is set to “4K”.

Pre-recording will not be performed during the preconfigured interval in “Pre Rec Time” if the time interval after the power of the camera is turned on or after switching from the Playback mode to the Recording mode up to the time when recording starts is shorter than the duration configured here.

Operation sound is muted in Pre Rec mode.

Caution

In the following cases, video and audio during the specified Pre Rec time may not be recorded when the actual recording starts.
- Starting recording immediately after recording stops
- Immediately after configuring “Rec Mode”

Unavailable when “System” is set to “High-Speed”.

“Pre Rec” will be canceled when the power is turned off. “Rec Mode” will be restored to “Normal”.
If “Quick Restart” is set to “On”, the camera will also return to “Normal” recording mode when the LCD monitor is closed.

Setting	Description
15 sec	Records video and audio 15 seconds before actual recording starts.
10 sec	Records video and audio 10 seconds before actual recording starts.
5 sec	Records video and audio 5 seconds before actual recording starts.