Troubleshooting

Sometimes playback is interrupted at the connecting section between two scenes. This is not a malfunction.

When the Silent mode is used, operation sounds will not be output. Turn off the Silent mode.

Operation sound is not output when “Operation Sound” is set to “Off”.
Select “Low” or “High”.

Audio sound is not recorded for videos taken in High-Speed.

Audio sound is not recorded for videos taken in Time-Lapse Rec.

Clean the terminals of the SD card with a dry cotton swab or something similar.

Execute “Format SD Card” in the “System” menu. (All data will be deleted.)

Clean the terminals of the SD card with a dry cotton swab or something similar.

Execute “Format SD Card” in the “System” menu. (All data will be deleted.)

Verify the system requirements of your PC when using CyberLink PowerDirector to play back.

Disconnect the cable and connect again.

Reset this unit.

Adjust the TV's screen accordingly.

Images and sounds may not be output properly depending on the TV connected. In such cases, perform the following operations.

Depending on the type of TV connected, this symptom is normal and not a malfunction.