[CH-1]
Connecting a Earphone
TOPAudio output from the [PHONES] terminal can be selected using the [A/V Set] 
[Monitor] item or the [MONITOR] selection switch on the camera recorder.
The different combinations of settings that are output from the [PHONES] terminal and monitor speaker are as follows.
|
[MONITOR] Selection Switch Setting |
[Monitor] Setting |
[PHONES] Terminal |
Speaker |
||
|---|---|---|---|---|---|
|
L |
R |
||||
|
|
- |
CH-1 |
CH-1 |
||
|
[BOTH] |
[Mix] |
CH-1+CH-2 |
CH-1+CH-2 |
||
|
[Stereo] |
CH-1 |
CH-2 |
|||
|
[CH-2] |
- |
CH-2 |
CH-2 |
||
Connect a earphone.
Select the channels to monitor using the different combinations of the left and right [MONITOR SELECT] switches.
|
[MONITOR SELECT] Setting |
Channels to Monitor |
Description |
|---|---|---|
 |
[CH-1] |
Outputs the audio recorded in [CH-1]. |
 |
[CH-2] |
Outputs the audio recorded in [CH-2]. |
 |
[CH-1]/[CH-2] |
Outputs the audio recorded in [CH-1] and [CH-2]. |
 |
[CH-3] |
Outputs the audio recorded in [CH-3]. |
 |
[CH-4] |
Outputs the audio recorded in [CH-4]. |
 |
[CH-3]/[CH-4] |
Outputs the audio recorded in [CH-3] and [CH-4]. |
Use the [MONITOR] adjustment knob to adjust the monitor volume.
