Restoring and Updating the SD Card

TOP

It is necessary to restore the SD card if an abnormality occurs to the data in the card due to some reasons.

Memo

[!RESTORE] appears at the remaining media display area when an SD card that requires restoring is inserted.

Executing this function while [!RESTORE] is not displayed updates the data inside the SD card.

Select [System] arrowR

[Media]

[Restore Media].

Restore Media

Select the SD card to be restored and press the Set button ( REC button

Restoring starts.

Restoring is complete.

When restoring is complete, “Complete” appears and the camera recorder returns to the [Restore Media] screen.

When no media that requires restoring is inserted, the camera recorder returns to the [Media] menu screen.

Caution

[Restore Media] can only be selected in Camera mode. However, it cannot be selected while the camera recorder is recording. Select [Restore Media] in Camera mode when the camera recorder is not recording.

[Restore Media] does not restore the SD card to its original states completely. If restoring fails, replace or format the SD card. Take note that formatting erases all the information inside the SD card.

Restoring cannot be performed in the following cases.

Camera recorder is recording in progress.

SD card is not inserted.

Write-protect switch of the SD card is set ( Lock is displayed).