Global
Mobile User Guide

Starting Distribution

TOP
Perform the necessary settings for the decoder device or the PC application.

For details on the settings, please refer to the “INSTRUCTIONS” of the respective devices and applications.

Memo

If there is an NAT router within the communication path between the camera and the decoder, port forwarding setup is required. For details on the settings, please refer to the “INSTRUCTIONS” of the router in use.

The following parameters are required when connecting to this camera recorder using the RTSP/RTP.
Port number: 554
Stream ID: stream

Use the following to access via URL.
rtsp://<IP address of the camera recorder>:554/stream

With the network connection established, set [Live Streaming] to “On”.

Set [Main Menu] arrowR [System] arrowR [Network]/[Settings] arrowR [Live Streaming Set] arrowR [Live Streaming] to “On”.

The network connection mark appears on the display screen when a network connection is established.

NetworkStriaming_890
Memo

You can also assign “Live Streaming” to a user button.

You can view the status of distribution on the LCD monitor.

Icon

Status

LiveRed_01

(Red)

Distribution in progress (good connection quality)

Blinks when distribution starts or stops

LiveRed+err_01

(Red)

Distribution in progress (poor connection quality)

LiveWh_01

(Yellow)

Waiting for connection (during RTSP/RTP) or connection failed

When the Fukidashi icon is displayed, you can view the details of the error on the [Network] screen of the status screen.

LiveStream_Err_890
Caution

Streaming may be interrupted temporarily 24 hours after the process started.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide