For specifying network-related settings.
The display of the software keyboard for input varies according to the item you are setting.
Network/Settings Item
TOPWeb
For setting the functions that make use of the web browser.
Web Access
To access via a web browser, set to “On”.
[Setting Values: On, Off]
Camera Name
For setting the name displayed on the web browser. Enter not more than 8 characters using the software keyboard.
Default value:
HM890
HM850
Login Name (Fixed)
The login name is “prohd”. It cannot be changed.
Login Password
Changes the password for accessing via a web browser.
The current password is displayed. Enter a new password directly.
Enter not more than 31 characters using the software keyboard.
Live Streaming Set
For specifying settings for distributing live video images.
Users cannot access this menu in the following cases.
When [Record Format] [System] is set to “HD+SD” or “HD+Web”
When [Record Format] [Frame & Bit Rate] is set to “24p”
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, Off]
“On” cannot be selected if network connection is not established.
“On” cannot be selected when FTP is running.
Live streaming switches to “Off” when the power is turned off.
Resolution
For setting the resolution of the video image during live distribution.
The camera recorder restarts when the setting is changed.
The available options vary according to the settings for [ Resolution] and [ Frame & Bit Rate] under [Record Format].
Resolution |
No. of Frames for Frame & Bit Rate |
Setting values |
---|---|---|
1920x1080, 1440x1080 |
60p, 60i, 30p |
1920x1080, 1280x720, 720x480, 480x270 |
50p, 50i, 25p |
1920x1080, 1280x720, 720x576, 480x270 |
|
1280x720 |
60p, 30p |
1280x720, 720x480, 480x270 |
50p, 25p |
1280x720, 720x576, 480x270 |
|
720x480
|
60i |
720x480, 480x270 |
720x576
|
50i |
720x576, 480x270 |
The settings cannot be changed during live streaming or recording.
When [System] [Record Set] [Record Format] [SD Aspect] is set to “4:3”, the aspect ratio of the live streaming image becomes “4:3”.
Frame & Bit Rate
For setting the frame rate and encoding bit rate of the video image during live distribution.
The available options vary according to the settings for [Resolution] above, as well as [ Frame & Bit Rate] under [Record Format].
No. of Frames for Frame & Bit Rate |
Resolution |
Setting values |
---|---|---|
60p, 60i, 30p |
1920x1080 |
60i (8.0M), |
1280x720 |
30p (5.0M), |
|
720x480 |
60i (5.0M), |
|
480x270 |
30p (0.2M) |
|
50p, 50i, 25p |
1920x1080 |
50i (8.0M), |
1280x720 |
25p (5.0M), |
|
720x576 |
50i (5.0M), |
|
480x270 |
25p (0.2M) |
The settings cannot be changed during live streaming.
An encoding bit rate exceeding 5.0 Mbps cannot be selected when [Type] is set to “RTSP/RTP”.
An encoding bit rate exceeding 3.0 Mbps cannot be selected when [Type] is set to “ZIXI”.
Type
For setting the system to transfer videos for distribution.
[Setting Values: MPEG2-TS/UDP, MPEG2-TS/TCP, RTSP/RTP, ZIXI]
Use reception devices that are compatible with the respective transfer systems.
To use the “ZIXI” setting, a dedicated server is needed separately.
UDP/TCP Settings
For specifying the settings that are enabled only when [Type] is set to “MPEG2-TS/UDP” or “MPEG2-TS/TCP”.
The settings cannot be changed during live streaming.
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
The default value is 6504.
RTSP/RTP Settings
For specifying the settings that are enabled only when [Type] is set to “RTSP/RTP”.
The settings cannot be changed during live streaming.
Password
Changes the password for RTSP authentication to enable client access. The current password is displayed. Enter a new password directly.
There is no default value (blank).
Enter not more than 31 characters.
ZIXI Settings
For specifying the settings that are enabled only when [Type] is set to “ZIXI”.
The settings cannot be changed during live streaming.
Destination Address
For setting details such as the host name and the IP address of the live distribution destination.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Destination Port
Enter the network port number of the live distribution destination using an integer between 1 and 65535.
The default value is 2088.
Stream ID
For setting the registered stream ID of the live distribution destination.
The default value varies with the product model.
Enter not more than 63 characters.
Password
For setting the [Stream ID] password.
There is no default value (blank).
Enter not more than 127 characters.
Latency
For setting the latency mode.
[Setting Values: Medium, Low]
Connection Setup
For specifying the settings for connecting to the network.
A [Wizard] screen will appear according to the adapter connected to the rear [HOST] terminal. Follow the instructions to perform the setting.
You can Store, Load, and Delete the settings specified on the [Wizard] screen.
Wizard
A [Wizard] appears according to the adapter connected to the rear [HOST] terminal.
Follow the instructions on the screen to perform setting.
Load
Loads the settings on the [Wizard] screen.
Store
Saves the settings on the [Wizard] screen.
Delete
Deletes the saved settings.
Metadata Server
For registering the FTP server for importing the metadata and the path of the file to be imported.
Up to 4 settings can be registered.
Meta-FTP1 to Meta-FTP4
(The name that is specified in the respective [Alias] items is displayed.)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will be displayed in the [Import Metadata] options.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
[Setting Values: FTP, SFTP, FTPS, FTPES]
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
File Path
Enter the path name for the metadata file (“/pub/meta.xml”, “/home/user/meta2.xml”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.
Clip Server
For setting the server and directory for uploading recorded clips in the SD card to the FTP server.
Clip-FTP1 to Clip-FTP4
(The name that is specified in the respective [Alias] items is displayed.)
Alias
For setting a name to distinguish the settings of this camera recorder.
The name set in this item will appear on the [FTP Upload] action screen of the thumbnail display.
Enter not more than 31 characters.
Protocol
For setting the protocol of the FTP server to be connected.
FTP:
Protocol that does not encrypt the incoming and outgoing data.
SFTP:
Protocol that encrypts incoming and outgoing data using SSH.
FTPS:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an implicit mode (starts encrypted communication once connection starts).
FTPES:
Protocol that encrypts incoming and outgoing data using SSL or TLS. It uses an explicit mode (starts encrypted communication after permission is granted).
[Setting Values: FTP, SFTP, FTPS, FTPES]
Server
For setting the server name (“mystation.com”, etc.) or the IP address (“192.168.0.1”, etc.) of the FTP server.
Enter not more than 127 characters using single-byte alphanumeric characters (a to z, 0 to 9), single-byte hyphen [-], or dot [.].
Port
Enter the FTP server port number to use using an integer between 1 and 65535.
The default value varies with the Protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
Dir. Path
Enter the path name for the directory to upload to (“/pub”, “/home/user”, etc.)
Enter not more than 127 characters.
Username
Enter the user name for connecting to the FTP server.
Enter not more than 31 characters.
Password
Enter the password for connecting to the FTP server.
Enter not more than 31 characters.
PASV Mode
For setting whether to set the communication mode used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a connection from the FTP server to the camera cannot be established.
[Setting Values: On, Off]
When [Protocol] is set to “SFTP”, this item appears as “---” and cannot be selected.
Reset Network
Restores all items in the [Network] menu to their default settings.