Global
Mobile User Guide

Display Screen in Media Mode

TOP

Media Display 0 Screen

This screen displays the media status or event. It is also used to display warnings only.

MediaDisplay0_890

Appears only during warnings

Media Display 1 Screen

MediaDisplay1_890

Media Display 2 Screen

MediaDisplay2_890

Media

Displays the media slot (A or B) of the currently played clip.

Lock appears when the write-protect switch of the SD card is set.

Voltage/Battery Power

Displays the current status of the power supply in use.

Memo

Displayed in the Media Display 0 screen during warnings only.

Resolution

Displays the video image resolution.

Frame Rate/Bit Rate

Displays the frame rate and bit rate in pairs.

Operation Guide

Displays a guide for the current operation buttons.

Audio Level Meter

Displays the audio levels for [CH-1] to [CH-4].

AudioLevel_890
Memo

This item is not displayed when [Main Menu] arrowR [LCD/VF] arrowR [Display Settings] arrowR [Audio Meter] is set to “Off”.

Volume Operation Indicator

This item is displayed when the LCD BRIGHT value (-10 to +10) is changed.

[LCD PEAKING +/-] operation is disabled in the Media mode, and its value is fixed at “-10”.

Position Bar

Displays the current position in the video.
During trimming, the position bar appears in green, and icons for the in and out points are displayed.

Information Display

Use the [F.ASSIST/4] button to switch between camera information display, GPS display and turning off the display.

The GPS display displays information on the recording location of the video being played back only when GPS information has been recorded.
The local date/time is displayed.

Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded.

MediaDisplay890
Memo

Trimming information is displayed while trimming is in progress. In this case, pressing the [F.ASSIST/4] button does not switch the display.

Date/Time Display

Displays the date/time that is recorded on the currently played SD card.

Memo

The date/time display style can be specified in [LCD/VF] arrowR [Display Settings] arrowR [Date Style]/[Time Style].

Time Code ( Time Code )/User’s Bit ( Users Bit ) Display

Displays the time code (hour: minute: second: frame) or user’s bit data recorded in the SD card being played back.

Example of time code display:

TmeCode

Colon (:) denotes non-drop frames and dot (.) denotes drop frames.

Example of user’s bit display:

UB
Memo

You can specify whether to display the time code, user’s bit, or turn off the display in [TC/UB] of [Main Menu] arrowR [LCD/VF] arrowR [Display Settings].

Event/Warning Display Area

Displays error messages.

Media Status

PLAY:

Playing

STILL:

Still picture playback mode

FWD *:

High-speed playback in the forward direction (* playback speed: 5x, 15x, 60x, or 360x)

REV *:

High-speed playback in the reverse direction (* reverse playback speed: 5x, 15x, 60x, or 360x)

STOP:

Stop mode

P.OFF:

Power OFF

Check Mark

Displayed when the currently played clip is selected.

OK Mark

Displayed when OK mark has been appended.

Clip Information

Displays current clip number/total number of clips.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide