Global
Mobile User Guide

Displaying Return Videos from an External Device 890 890CH

TOP

Return video from an external device (switcher, etc.) can be displayed on the viewfinder or LCD monitor of the camera recorder.

Memo

This feature is only usable in the Camera mode.

Set the camera recorder to the Camera mode.
Assign the “Return Video” function to any of the user buttons.

This excludes the [AUTO FOCUS/11] button.

Select the way the return video is to be displayed.

Select in [Camera Function] arrowR [User Switch Set] arrowR [Return Video].

Select the input destination of the return video.

The input destination of the return video can be set using the [A/V Set] arrowR [Video Set] arrowR [Return Input] item.

Select the aspect ratio of the return video.

Set using [A/V Set] arrowR [Video Set] arrowR [Return Aspect].

Press the user button that is assigned with the “Return Video” function.

By pressing the user button assigned with the “Return Video” function, the captured image or return video is displayed according to the method specified in step Step3 .

Memo

When the return video is displayed in full screen, the following displays and operations are disabled.

Zebra display

Skin Detail operation

Spot Meter display

Focus Assist feature (ACCU-Focus operation)

Aspect Marker display

Safety Zone display

Center Mark display

During display of PiP and return video in full screen, the [LCD Mirror] setting becomes invalid and is set automatically to “Normal”.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide