Global
Mobile User Guide

Adjusting the Iris

TOP

You can adjust the aperture of the lens iris manually or automatically according to the brightness of the object.

Iris_890

Manual Iris (Manual Adjustment) Mode

The aperture value (F-number) of the lens can be set manually.

Set the [IRIS A/M] mode selection switch on the lens to “M”.

The camera recorder switches to the Manual Iris mode, and the Auto icon on the screen disappears.

Turn the iris ring on the lens to adjust the iris manually.

The open F-number of the supplied lens varies with the zoom position.   Lenz

Wide [W] end:

F1.6

Tele [T] end:

F3.0

F-number

Description

Decrease

The subject appears brighter.
The focused range becomes sharper, while the background is blurred to produce a soft image.

Increase

The subject appears darker.
Background of image becomes focused as well.

Memo

Even while in the Manual Focus mode, pressing the [IRIS] button on the lens or the user button assigned with the [One Push Iris] function switches the camera recorder to the One-push Auto Iris mode.

Even while in the Manual Focus mode, pressing and holding the [IRIS] button on the lens or the user button assigned with the [One Push Iris] function switches the camera recorder to the Push Auto Iris mode.

Auto Iris (Automatic Adjustment) Mode

The iris is automatically adjusted according to the brightness of the object.

Set the [IRIS A/M] mode selection switch on the lens to “A”.

The camera recorder switches to the Auto Iris mode, and the Auto icon appears on the screen.

AutoIris_890
Memo

Set the [FULL AUTO] switch on the camera recorder to “ON” to enter Auto Iris mode (automatic adjustment mode). The iris is automatically adjusted according to the brightness of the object.
In this case, operation of the [IRIS A/M] mode selection switch and [IRIS] button on the lens is disabled.

The iris open/close limit can be set in [Main Menu] arrowR [Camera Function] arrowR [Auto Iris Limit (OPEN)]/[Auto Iris Limit (CLOSE)] during Auto Iris.

You can use the cross-shaped button ( L_botton R_botton ) on the side control panel to set the target level (brighter/darker) of the auto iris.

The convergence speed of the auto iris can be set in the menu.

One Push Auto Iris Lenz

When the camera recorder is in the Manual Iris mode, press the [IRIS] button on the lens to adjust the iris according to the brightness of the subject.

Memo

“One Push Iris” can also be assigned to other user buttons.

Push Auto Iris

When the camera recorder is in the Manual Iris mode, press and hold the [IRIS] button on the lens to change to the Auto Iris mode temporarily. The iris will be automatically adjusted according to the brightness of the subject.

Memo

“One Push Iris” can also be assigned to other user buttons.

About the Iris F-number

Blurry effects due to “small aperture diffraction” may occur when the diameter of the iris becomes too small. When this phenomenon occurs, the F-number on the screen turns gray to warn you that the diffraction F-number of the iris has been exceeded.
You are recommended to make appropriate use of ND filters to prevent the F-number from turning gray.

 

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide