Global
Mobile User Guide

Using AC Power (DC IN Power)

TOP

Use the AC adapter (sold separately) to operate the camera recorder with AC power.

Connect the DC cable of the AC adapter to the [DC INPUT] terminal of the camera recorder.

Check that the power of this unit and that of the AC adapter are both set to “OFF”, followed by connecting according to the diagram.

AC_Connect_890
Turn on the power of the AC adapter, followed by setting the [POWER ON/OFF] switch of this unit to “ON”.

Power will be supplied to the camera recorder.

Caution

Do not insert or remove the DC cable during recording.

Do not use power supply of high voltage fluctuation, containing noise such as ripple, or with insufficient capacity.

Built-In Battery

The date/time and time code data are stored using the built-in rechargeable battery.

When power is connected to the camera recorder, the built-in battery always gets charged. When the power is disconnected, the battery gradually discharges.

The battery will be totally discharged if left unused for 3 months and the date/time and time code data will be reset. When this happens, set the [POWER ON/OFF] switch to “ON” to display the [Initial Setting] screen, then set the date/time.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide