For setting the terminal to output the video.
Video Set Item
TOPHDMI/SDI Out
[Setting Values: HDMI+SDI, SDI, HDMI, Off]
When the [Network] setting is set to “On(SDI Off)”, “HDMI+SDI” and “SDI” are not selectable. And when “On(HDMI Off)” is set, “HDMI+SDI” and “HDMI” are not selectable.
When KA-M790G (Multicore Remote Adapter: optional) is connected to the rear of the camera recorder and power is supplied from the 26-pin camera cable, “HDMI+SDI” is not selectable.
Resolution
For selecting the resolution of video output from the [HDMI]/[SDI] terminal according to the monitor to be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p, 1080i, 1080p]
The selectable options vary according to the setting in [System]/[ Resolution]/[ Frame & Bit Rate] of [System] [Record Set] [Record Format].
Cross conversion output is not possible.
When [GPS] is set to “On”, and [HDMI/SDI Out] is set to “HDMI+SDI” or “SDI”, “1080p” is not selectable.
HDMI Color
For setting the color format of HDMI signals.
This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, Auto]
HDMI Enhance
For setting the color range of HDMI signals. When connecting to a PC monitor, set this to “On”.
This item is selectable only when [HDMI/SDI Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, Off]
SDI Rec Trigger
For setting whether to superimpose trigger signals in tandem with the [HD/SD SDI OUT] terminal as well as the [REC] button on the camera body.
When a compatible device is connected, recording/stop control signals are output in tandem with the operation of the [REC] button.
[Setting Values: On, Off]
SD Aspect
For setting the style of displaying down-converted images on a 4:3 aspect ratio screen.
Side Cut:
Displays image with the left and right sides cut off.
Letter:
Displays as a wide image with the top and bottom blackened.
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, Squeeze]
When [Record Format] [System] is set to “SD” or “SD(SDI In)”, and when [SD Aspect] is set to “4:3”, this item appears as “---” and cannot be selected.
When [Record Format] [System] is set to “SD”, and [SD Aspect] is set to “16:9”, “Side Cut” in [A/V Set] [Video Set] [SD Aspect] cannot be selected.
SD Set Up
For selecting whether to add a setup signal to the video signal output from the [VIDEO OUT] terminal.
Setup signals are added when “7.5%” is selected.
[Setting Values: 7.5%, 0.0%]
(Default values: 7.5% (U model), “0.0%” (E model))
Depending on the menu settings of the camera recorder and the condition of the cable connected to it, the setup signal setting may be fixed at “0.0%”. “0.0%” is displayed in gray in this case.
When [Main Menu] [System] [Record Set] [Record Format] [Frame & Bit Rate] is set to “50p” or “50i”, “---” is displayed and selection is disabled.
HDMI Out Character
For selecting whether to display the screen text and menu text on the output screen from the [HDMI] output terminal located at the side terminal section of the camera recorder.
[Setting Values: On, Off]
SDI Out Character
For selecting whether to display the screen text and menu text on the output screen from the [HD/SD SDI OUT] terminal located at the side terminal section of the camera recorder.
[Setting Values: On, Off]
VIDEO Out Character
For selecting whether to display the screen text and menu text on the output screen from the [VIDEO OUT] terminal located at the side terminal section of the camera recorder.
[Setting Values: On, Off]
Genlock Input
For selecting the input destination of video synchronizing signals.
SDI:
Inputs video synchronizing signals from the [HD/SD SDI IN] terminal on the side.
Adapter:
Inputs video synchronizing signals from the adapter connected to the accessory connection terminal (68 pins) on the rear of the camera recorder.
BNC:
Inputs video synchronizing signals from the [GENLOCK] terminal on the side.
[Setting Values: SDI, Adapter, BNC]
Genlock Adjust
Adjusts the H Phase of the camera recorder’s video signals with respect to the input synchronizing signals.
Analog SD H Phase
Adjusts the H Phase of the camera recorder’s SD analog signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.
[Setting Values: -28 to +82] ( 0)
Analog HD H Phase
Adjusts the H Phase of the camera recorder’s HD analog signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.
[Setting Values: -1024 to +1023] ( 0)
SD-SDI H Phase
Adjusts the H Phase of the camera recorder’s SD-SDI signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.
[Setting Values: -373 to +373] ( 0)
When [A/V Set] [Video Set] [HDMI/SDI Out] [Resolution] is set to “720p”/“1080i”/“1080p”, “---” is displayed and selection is disabled.
HD-SDI H Phase
Adjusts the H Phase of the camera recorder’s HD-SDI signal with respect to the external synchronizing signal input to the terminal set in the [Genlock Input] item.
[Setting Values: -1024 to +1023] ( 0)
When [A/V Set] [Video Set] [HDMI/SDI Out] [Resolution] is set to “480i”/“480p”/“576i”/“576p”, “---” is displayed and selection is disabled.
Return Input
For selecting the input destination of the return video.
SDI:
Inputs return video from the [HD/SD SDI IN] terminal on the side.
Adapter:
Inputs return video from the adapter connected to the accessory connection terminal (68 pins) on the rear of the camera recorder.
Studio:
Inputs return video from studio adapter connected to the [STUDIO] terminal on the side.
[Setting Values: SDI, Adapter, Studio]
If this item is set to “SDI”, the setting for [Camera Function] [User Switch Set] [Return Video] is fixed at “Camera Return”.
Return Aspect
For selecting the aspect ratio of the return video.
16:9:
Select this option if the return video is a squeeze signal.
4:3:
Select this option if the return video is a 4:3 aspect signal (including Letter Box).
[Setting Values: 16:9, 4:3]