For setting whether to add color to the contour of the focused image upon switching the image to black-and-white.
Shooting Assist Item
TOPFocus Assist
[Setting Values: On, Off]
Type
For specifying the operation when the [F.ASSIST/4] button is pressed.
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus (forced focus) functions. The depth of field of the object becomes shallower to enable easier focusing. The ACCU-Focus function switches automatically to “Off” after about 10 seconds.
Normal:
Enables only the Focus Assist function. The focused area is displayed in color to enable easier focusing. Display color can be specified with [Color].
[Setting Values: ACCU-Focus, Normal]
Color
For setting the display color of the focused area when Focus Assist is activated.
[Setting Values: Blue, Green, Red]
Zebra
For selecting whether the number of zebra patterns to display at the bright areas of the subject.
2Patterns:
Displays two types of zebra patterns (Zebra1 and Zebra2).
1Pattern:
Displays one type of zebra pattern (Zebra1).
[Setting Values: 2Patterns, 1Pattern]
Top 1
For setting the maximum brightness level for displaying the Zebra 1 pattern.
[Setting Values: Over, 100% to 5% (in 5% increments)] ( 80%)
Bottom 1
For setting the minimum brightness level for displaying the Zebra1 pattern.
[Setting Values: 100% to 0% (in 5% increments)] ( 70%)
Top 2
For setting the maximum brightness level for displaying the Zebra 2 pattern.
[Setting Values: Over, 100% to 5% (in 5% increments)] ( Over)
This item cannot be selected when [Zebra] is set to “1Pattern”.
Bottom 2
For setting the minimum brightness level for displaying the Zebra 2 pattern.
[Setting Values: 100% to 0% (in 5% increments)] ( 80%)
This item cannot be selected when [Zebra] is set to “1Pattern”.
Peaking Frequency
For setting the frequency bandwidth for emphasizing the outline using the [VF PEAKING] adjustment knob or [LCD PEAKING +/-] button.
[Setting Values: High, Middle, Low]