Side Control Panel
TOP[VF BRIGHT] Viewfinder Brightness Adjustment Knob
[VF PEAKING] Outline Adjustment Knob
This knob is disabled when Focus Assist is in operation.
[F.ASSIST/4] Focus Assist/User 4 Button
For switching the focus assist function ON or OFF.
You can also use it as a user button by assigning a specific feature in the menu setting to this button.
[OIS/1] Optical Image Stabilizer/User 1 Button
For switching the image stabilizer feature mode ON or OFF.
You can also use it as a user button by assigning a specific feature in the menu setting to this button.
[MARKER/2] Marker/User 2 Button
This button toggles ON/OFF the marker, safety zone, and center mark displays.
You can also use it as a user button by assigning a specific feature in the menu setting to this button.
[MENU/THUMB] Menu/Thumbnail Button
Displays the menu screen during Camera mode.
Switches between [Main Menu] and [Favorites Menu] when the [MENU/THUMB] button is pressed and held down while the menu screen is displayed.
Displays the menu screen when the button is pressed during thumbnail display in the Media mode.
Stops playback and displays the thumbnail screen when the button is pressed during playback screen display in the Media mode.
[ND FILTER] ND Filter Switch
[DISPLAY] Display Button
Press the [DISPLAY] button to switch to the display screen during normal screen display (when the menu screen is not displayed).
Switches between [Main Menu] and [Favorites Menu] when the [DISPLAY] button is pressed while the menu screen is displayed.
[GAIN L/M/H] Gain Level Switch
[WHT.BAL B/A/PRESET] White Balance Switch
[POWER ON/OFF] Power ON/OFF Switch and Indicator Lamp
Turns ON/OFF the power. The indicator lamp lights up in green when the power is on.
When the power is OFF, “POFF” appears on the LCD monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
[REC/10] Record Trigger/User 10 Button
Starts/stops recording.
You can also use it as a user button by assigning a specific feature in the menu setting to this button.
[AUDIO LEVEL CH-1/CH-2]/[AUTO]CH-1/CH-2 Recording Level Adjustment Knob/Auto Indicator Lamp
[CANCEL] Cancel Button
Cancels various settings and stops playback.
Cross-Shaped Button ( )/Set Button ( )
The function changes according to the operation status of the camera recorder.
During menu operation (all modes)
Set Button ( ):
Confirms menu items and setting values
Cross-shaped Button ( ):
Selects menu items and setting values
During Camera mode
Shutter operation:
Set Button ( ):
Shutter ON/OFF
Cross-shaped Button ( ):
Switches shutter speed when shutter is ON
Cross-Shaped Button ( ):
AE level operation
When [Camera Function] [AE LEVEL SW] is set to “AE LEVEL/VFR”, the cross-shaped button ( ) is used to set the number of frames during Variable Frame Rec.
[LOAD FILE/3] Load File/User 3 Button
Displays the screen for retrieving a picture file.
You can also use it as a user button by assigning a specific feature in the menu setting to this button.
[MONITOR] Audio Monitor Level Adjustment Knob
For adjusting the volume of the monitor speaker and earphone.