Select “Connect with Access Point”.
Connecting via Wireless LAN
TOPConnection via Access Point
Follow the screen instructions to complete setting. Perform setting for the following.
Mode of connection
Method of setting
* SSID, type of encryption, Passphrase, and IP Address setting (“DHCP” or “Manual”) in cases other than WPS
After setting is complete, you can access the camera recorder via a web browser.
P2P Connection
You can access the web function of this camera recorder from devices such as a smartphone, tablet terminal, or PC.
Select “P2P”.
Follow the screen instructions to complete setting.
Perform setting for the following.
Mode of connection
Method of setting
* SSID and Passphrase in cases other than WPS
When “WPS” is selected in the [Select Setup Type] screen, the following steps and are not required.
Press the [STATUS] button on the camera recorder to display the status screen.
Press the cross-shaped button ( ) to display the [Network] screen.
Check to ensure that the SSID and Passphrase that you have set in the wizard are displayed.
Display a list of the access points in the wireless connection settings of the smartphone, tablet terminal or PC, and select “HM890--*****” or “HM850--*****”. (***** are numbers that vary with the device used.)
After the password confirmation screen appears, enter the [Passphrase] displayed on the [Network] screen.
After setting is complete, you can access the camera recorder via a web browser.