Global
Mobile User Guide

Adjusting the Focus by Face Detection Lenz

TOP

This function detects human faces and automatically adjusts focus during Auto Focus.

It can also track moving objects.

When several faces are detected, you can select one to focus on.

Memo

This function can also adjust the brightness automatically according to the brightness of the face detected.

FaceDetect01_890
Assign the “Face Detect” function to any of the user buttons.

This excludes the [AUTO FOCUS/11] button.

Focus the camera recorder on a person and press the user button that is assigned with “Face Detect”.

When Face detection is enabled, the face detection icon ( FaceDetect ) appears.

When [Main Menu] arrowR [Camera Function] arrowR [User Switch Set] arrowR [Face Detect] is set to “AF”, “ FaceDetect    Focus_Auto ” appears.

When [Main Menu] arrowR [Camera Function] arrowR [User Switch Set] arrowR [Face Detect] is set to “AF&AE”, “ FaceDetect  AE±0” appears.

If you select the person nearest to the center of the screen, an orange frame will appear on his face.

Focus will be automatically adjusted for the selected person.

FaceDetectS_01
Memo

If the detection frame does not appear, make sure that the [AUTO FOCUS/11] switch is set to “ON”. Also, if [Face Detect] is set to “AF&AE”, set at least one of the iris, gain, and electronic shutter control items to the automatic adjustment mode.

Selecting Specific Person from Several Persons

Hold down the user button that is assigned with “Face Detect”.

The camera recorder will enter face selection mode and the face detection icon ( FaceDetect ) will blink.

An orange frame will appear on the face of the person nearest to the center of the screen. Blue frames will appear on the faces of others.

FaceDetectS_02
Select a specific portrait subject.

Use the cross-shaped button ( L_botton R_botton U_botton D_botton ) to select a person.

An orange frame will appear on the face of the selected person and focus will be automatically adjusted.

FaceDetectS_03
Press the Set button ( REC button ) to confirm the person for face detection.
Memo

Press the [CANCEL] button to cancel the selection.

You can specify the detection sensitivity and the operation speed after losing sight of the face using [Main Menu] arrowR [Camera Function] arrowR [User Switch Set] arrowR [Face Detect] arrowR [Sensitivity] and [Hysteresis].

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide