Global
Mobile User Guide

Using a Battery Pack

TOP

Recommended Batteries

U model:

Dionic90 (Anton/Bauer)

E model:

Endura-HL9 (IDX)

Models with an E suffix are for the European market and the UL Listing mark is not applicable.

Caution

Make use of the recommended batteries. Heavy batteries may fall off if not used correctly.

For details on how to charge the battery, please refer to the “INSTRUCTIONS” of the battery in use.

Battery Operating Time

The following are the approximate times for continuous operation on fully-charged batteries.

Battery

Continuous Recording Time (At 25 °C)

Dionic90 (U model)

Approx. 2.8 h

Endura-HL9 (E model)

Approx. 2.7 h

Memo

Actual operating times may differ depending on the age of the battery, charging condition, and operating environment.

Operating time is shortened in cold environment.

The operating time may shorten when power zoom is used, accessories are connected, or when the LCD monitor is frequently used.

Precautions for the Battery Operation

Do not remove the battery when the [POWER ON/OFF] switch is “ON”.

Do not insert or remove the DC cable when the battery is in use.

Leaving the camera recorder unused with the battery inside will deplete the battery power even if you set the [POWER ON/OFF] switch to “OFF”. Remove the battery if you are not using the camera recorder.

Attaching/Detaching the Battery (U Model)

Use the Dionic90 (Anton/Bauer) battery.

Align the battery guide pins (x3) with the battery adapter guide hole, and insert them directly.
U_battTori_01
Slide the battery in the direction indicated by the arrow until a “click” sound is heard.
Memo

If the guide pins are not inserted straight, the battery will not be attached correctly.

Detaching the Battery

Press down the release lever and slide the battery toward you to detach it from the camera recorder.

U_battOut_01

Attaching/Detaching the Battery (E Model)

Use the Endura-HL9 (IDX) battery.

Attach the battery.

Face the terminal downward and attach the V mount of the battery onto the V mount attachment bracket of the camera recorder.

Press down the battery until it snaps into place.
E_battTori_01
Detaching the Battery

Press down the release lever and slide the battery upward to detach it from the camera recorder.

E_battOut_01

Precautions for Batteries

Store the battery in a cool and dry place when not in use. Do not expose the battery to high temperatures (such as in a car under direct sunlight). This will cause battery leakage and shorten the battery life.

Operating time is shortened if the battery terminal is dirty.

If the operating time shortens drastically even after charging, the battery may be reaching the end of its life. Replace the battery with a new one.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide