Global
Mobile User Guide

Lens Section 890 850

TOP

Name_Lenz

Filter Built-In Screw

Transparent or UV filter for lens protection, or filters for various effects can be installed.

Installable filter types: Φ72mmP0.75

Memo

Remove the lens hood when installing the filter.

Lens Cover Open/Close Switch

Focus Ring

Zoom Ring

To operate zoom with this ring, set the [ZOOM SERVO/MANUAL] switch WN8 to “MANUAL”.

Iris Ring

To operate the auto iris, set the [IRIS A/M] mode switch WN13 to “A”.

Zoom Servo Connector

This is a connector for connecting a zoom servo unit (sold separately). When using a separately sold zoom servo unit, set the [ZOOM SERVO/MANUAL] switch WN8 to “SERVO”.

[F.f] Back Focus Button and Indicator ‎Lamp

[ZOOM SERVO/MANUAL] Zoom Operation Servo/Manual Switch

Set to “SERVO” in the following cases.

When using the grip zoom lever WN12 on the lens, or the handle zoom lever B29 on this unit

When using a zoom servo unit (sold separately)

When operating remotely from a remote control unit connected to the [REMOTE1]/[REMOTE2] terminal or from a web browser

Lens Cable

For connecting to the camera’s [LENS] connection terminal.

[REC] Record Trigger Button

Starts/stops recording.

[RET] Return Video Button

Functions as a push autofocus button.   Lenz

You can also use it as a user button by assigning a specific feature in the menu setting to this button.

Zoom Lever at the Grip

To operate zoom servo with the zoom lever at the grip, set the [ZOOM SERVO/MANUAL] switch B8 to “SERVO”.

[IRIS A/M] Iris Mode Switch

Switches the mode of the iris ring B5 . Select “A” to set to auto iris, and “M” to set to manual iris.

[IRIS] Iris Momentary Button

When the [IRIS A/M] mode switch WN13 is set to “M”, Auto Iris mode is enabled while the button is pressed down.

Global
Mobile User Guide
GY-HM890 series / GY-HM850 series
Mobile User Guide