Rotate the LCD monitor to adjust the angle.
Adjusting the LCD Monitor
TOP
Slide the LCD cover lock release knob to open the LCD monitor.
Incline the LCD monitor to a position that enables easy viewing.
While the LCD monitor is open, you can rotate it 180 degrees upward or 90 degrees downward.
Rotating the LCD monitor 180 degrees upward enables you to see the screen from the lens side. To display the image when it is viewed from the opposite direction (mirror image), perform setting as follows.
Set [Main Menu] 
[LCD/VF] [LCD Mirror] to “Mirror” Set button ( 
)
Adjust the brightness, contour, and contrast of the LCD monitor.
You can change the angle and brightness of the LCD monitor according to your usage condition.
Changing the brightness of the screen will not affect the recorded images.
Adjusting the Brightness
Use the [LCD BRIGHT +/-] button to adjust the brightness of the LCD monitor.
The [+] button brightens the monitor and the [-] button darkens it.
Press the [+] and [-] buttons simultaneously to return to standard settings.
During adjustment, the brightness level is displayed on the LCD monitor.
Adjusting the Contour
Use the [LCD PEAKING +/-] button to adjust the contour of the LCD monitor.
The [+] button increases contour correction and the [-] button decreases contour correction.
Press the [+] and [-] buttons simultaneously to return to standard settings.
During adjustment, the contour level is displayed on the LCD monitor.
Memo
During Focus Assist operation, the contour correction effect on the LCD monitor will be temporarily disabled.
Adjusting the Contrast
Use the [LCD Contrast] menu to adjust the contrast of the LCD monitor.
Adjust using [Main Menu] [LCD/VF] [LCD Contrast].
Increasing the value increases the contrast. [Setting Values: +10 to -10] (Default value: 0)
Adjusting the LCD Backlight
Adjust using [Main Menu] [LCD/VF] [LCD Backlight].
When using the camera recorder at a bright location such as one subject to outside light, setting to “Bright” helps to ease viewing.
You can also adjust the backlight using the user button assigned with the “LCD Backlight” function.
